Search for: All records

The characterization of nanoparticles (NPs) in hydrocarbon matrices using single particle inductively coupled plasma mass spectrometry (spICP-MS) is underdeveloped. There are less than ten publications using spICP-MS in hydrocarbon matrices, and none have applied the technique to determine NP concentration and size distribution in asphaltenes after in-situ upgrading of heavy oils via solvent deasphalting. To our knowledge, no studies have used spICP-MS to track the nature of NP additives in the asphaltene fraction in hydrocarbons without adulteration of the sample. Particle number concentrations (PNC) derived from spICP-MS in hydrocarbon matrices are reported for the first time. Fe2O3 PNC increased by an order of magnitude, and NiO PNC increased 28 % compared to samples without additives, indicating that NPs were reasonably well-dispersed in the asphaltenes. Ionic concentrations were higher for Ni than Fe, which showed negligible changes in all samples. Here, we report the lowest size detection limits recorded for Fe2O3 NPs (32 nm ± 1 nm) using spICP-MS in hydrocarbon matrices. Further, NiO and Fe2O3 NP sizes matched the initial sizes added to the oil before precipitation, providing evidence that the nature of the NPs does not change after deasphaltation and subsequent mixing with asphaltenes. This study expands our understanding of the interactions between metal NPs and asphaltenes when used as co-precipitants during in situ upgrading of heavy crude oil. 

The short- and long-term impacts of nanoparticles (NPs) in consumer products are not fully understood. Current European Union (EU) regulations enforce transparency on products containing NPs in cosmetic formulations; however, those set by the U.S. Food and Drug Administration are lacking. This study demonstrates the potential of single-particle inductively coupled plasma tandem mass spectrometry (spICP-MS/MS) as a screening method for NPs present in powder-based facial cosmetics (herein referred to as FCs). A proposed spICP-MS/MS method is presented along with recommended criteria to confirm particle presence and particle detection thresholds in seven FCs. FC products of varying colors, market values, and applications were analyzed for the presence of Bi, Cr, Mg, Mn, Pb, Sn, Ag, Al, and Zn NPs based on their ingredient lists as well as those commonly used in cosmetic formulations. The presence of NPs smaller than 100 nm was observed in all FC samples, and no correlations with their presence and market value were observed. Here, we report qualitative and semi-quantitative results for seven FC samples ranging in color, brand, and shimmer. 

Abstract Cell culture media design is perhaps the most significant hurdle currently facing the commercialization of cultivated meat as an alternative source of dietary protein. Since media optimization for a specific culture system requires a significant amount of effort and investment, a major question remaining is whether media formulations can be easily shared across multiple production schemes for cells of different species and lineages. Here, we perform spent medium analysis to compare the specific nutrient utilization of primary embryonic chicken muscle precursor cells and fibroblasts to the murine C2C12 myoblast cell line. We demonstrate that these related cell types have significantly different nutrient utilization patterns collectively and on a per-cell basis, and that many components of conventional media do not appear to be depleted by the cells. Namely, glucose was not consumed as rapidly nor as completely by the chicken muscle precursors compared to other cells overall, and there were significant differences in specific consumption rates for several other key nutrients over the first day of culture. Ultimately, our results indicate that no one medium is likely ideal and cost effective to culture multiple cell types and that novel methods to streamline media optimization efforts will be important for the industry to develop. 

Abstract Avoiding faradaic side reactions during the operation of electrochemical devices is important to enhance the device stability, to achieve low power consumption, and to prevent the formation of reactive side‐products. This is particularly important for bioelectronic devices, which are designed to operate in biological systems. While redox‐active materials based on conducting and semiconducting polymers represent an exciting class of materials for bioelectronic devices, they are susceptible to electrochemical side‐reactions with molecular oxygen during device operation. Here, electrochemical side reactions with molecular oxygen are shown to occur during organic electrochemical transistor (OECT) operation using high‐performance, state‐of‐the‐art OECT materials. Depending on the choice of the active material, such reactions yield hydrogen peroxide (H₂O₂), a reactive side‐product, which may be harmful to the local biological environment and may also accelerate device degradation. A design strategy is reported for the development of redox‐active organic semiconductors based on donor–acceptor copolymers that prevents the formation of H₂O₂during device operation. This study elucidates the previously overlooked side‐reactions between redox‐active conjugated polymers and molecular oxygen in electrochemical devices for bioelectronics, which is critical for the operation of electrolyte‐gated devices in application‐relevant environments. 

Abstract Emerging photovoltaics (PVs) focus on a variety of applications complementing large scale electricity generation. Organic, dye‐sensitized, and some perovskite solar cells are considered in building integration, greenhouses, wearable, and indoor applications, thereby motivating research on flexible, transparent, semitransparent, and multi‐junction PVs. Nevertheless, it can be very time consuming to find or develop an up‐to‐date overview of the state‐of‐the‐art performance for these systems and applications. Two important resources for recording research cells efficiencies are the National Renewable Energy Laboratory chart and the efficiency tables compiled biannually by Martin Green and colleagues. Both publications provide an effective coverage over the established technologies, bridging research and industry. An alternative approach is proposed here summarizing the best reports in the diverse research subjects for emerging PVs. Best performance parameters are provided as a function of the photovoltaic bandgap energy for each technology and application, and are put into perspective using, e.g., the Shockley–Queisser limit. In all cases, the reported data correspond to published and/or properly described certified results, with enough details provided for prospective data reproduction. Additionally, the stability test energy yield is included as an analysis parameter among state‐of‐the‐art emerging PVs.